Snell & Wilcox NRS70 Operator'S Manual Download Page 60 | Manualshive

Page: 60 / 77

background image

NRS70 Series

SECTION 4

NRS70OPS

070803 Version 1 Issue 2

www.snellwilcox.com

4.36

Audio A and Audio B

These items allow various audio functions to be set
up for the 2 audio processing chains.

Audio A (B) Destination

Selecting items in this menu allows the processed
signal to be embedded into any one of the 8 pairs
of the SDI signal.

Routing Style

This function allows either Stereo or Mono routing
to be selected for the audio processing chain.

Stereo Routing

When this item is selected a stereo

pair

may be

selected  for  routing  through  the  audio  processing
chain.
For  example,  if  Source  3L  is  selected  in  Audio  A
Source Right menu then automatically the Audio A
Source  A  Left  will  be  changed  to  Source  3R.  i.e.
Chain A would be sourced from pair 3 with a stereo
inversion.

Mono Routing

When this item is selected a single channel may
be selected for routing through the audio
processing chain.
For example, if source 5L is selected in Src Chain
A Right then the Src Chain A Left is not changed.
i.e. each channel is selected independently.

Note that if the routing mode is changed the Mux
selection will not actually change until a new input
source chain selection is made.

Audio A (B) Source Left/Right

This menu allows any of the input audio sources to
be selected for processing.

Tone Enable

This will enable the internal tone as set by the

Tone Frequency and Tone Amplitude

function in

the

Audio Setup

screen.

Audio A (B) Left Gain

This function allows the gain of the left channel to
be adjusted by ±6 dB.
Preset is to 0 dB.

Audio A (B) Right Gain

This function allows the gain of the right channel to
be adjusted by ±6 dB.
Preset is to 0 dB.

Audio A (B) Control Left/Right

Invert Left and Invert Right

When enabled these functions will invert the
selected audio signal channel.

Preset is to not inverted.

Mute Left and Mute Right

When enabled these functions will mute the
selected audio signal channel.

Preset is to not muted.

Audio A (B) Defaults

If the audio signal is absent the output may be set
to this default signal.

This  function  defines  what  the  output  signal  will
become  under  these  conditions.  It  can  be  an
internally  generated

Tone

or

Silence,

or

Disable

when

no signal is embedded.

Preset is to Disable.

Output Disable

Checking this item will disable the embedded
output signal (not the AES output).

«
...
58
59
60
61
62
...
»

Summary of Contents for NRS70














































































Reviews:

No comments

Related manuals for NRS70

Brand: Vahle Pages: 96

Brand: SAMCHULLY Pages: 48

Brand: HAGER WERKEN Pages: 2

Brand: Pari Pages: 50

Brand: Icare Pages: 42

Brand: Panta Safe Light Pages: 2

Brand: Calrec Pages: 70

Brand: Jacto Pages: 12

Brand: Mackie Pages: 18

Brand: Mackie Pages: 2

Brand: Mackie Pages: 8

Brand: Mackie Pages: 7

Brand: A&D Pages: 29

Brand: Fillauer Pages: 12

Brand: lumishore Pages: 13

Brand: Eleiko Pages: 24

Brand: Horizon Fitness Pages: 17

Brand: Wiltron Pages: 13

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands