![background image](http://html.mh-extra.com/html/snell-and-wilcox/nrs70/nrs70_operators-manual_1309059044.webp)
NRS70 Series
SECTION 4
NRS70OPS
070803 Version 1 Issue 2
www.snellwilcox.com
4.20
◀
Pass Vertical Data (active on analog outputs)
SDI
Processing
Encoder
VI Blanking
(Individual Line
Selection)
via Setup/VI Blanking
Menu
Pass Vertical Data
via
Setup/Encoder
Menu
SDI Channel
When selected input vertical data is passed on a
line-by-line basis (as selected by the VBI function)
into the analog signals. When not selected the
vertical blanking in the analog outputs are blanked
without effecting the SDI channel.
◀
◀
◀
◀
Genlock
For details see page 4.18.
◀
◀
◀
◀
Pattern
This function allows
various patterns to be selected
and used as the output signal.
Pattern
Pattern Enable
Black
75% Colour Bars
100% Colour Bars
MultiBurst
100% Ramp
Black
◀
◀
◀
◀
Pattern Enable
When this item is selected (text highlighted) the
selected pattern will become the output signal.
◀
◀
◀
◀
GPI
This menu allows the 2 GPI inputs to be
configured.
GPI
GPI1 Open...
GPI2 Open...
GPI 2 Select...
1 Close...
2 Close...
◀
GPI 1 and GPI 2 Open
This function determines what happens when the
selected GPI input condition changes from closed
to open.
GPI 1, 2 Open
OFF
Memory 2
Memory 4
Memory 6
Memory 8
Memory 1
Memory 3
Memory 5
Memory 7
◀
OFF
No response.
◀
Memory 1 to 8
The unit will revert to the
setup stored in the selected
memory location.
◀
1 Close (GPI 1 Close) and 2 Close (GPI 2 Close)
This function determines what happens when the
selected GPI input condition changes from open to
closed.
OFF
Memory 2
Memory 4
Memory 6
Memory 8
Memory 1
Memory 3
Memory 5
Memory 7
GPI 1, 2 Close
◀
OFF
No response.
◀
Memory 1 to 8
The unit will revert to the
setup stored in the selected
memory location.