![background image](http://html.mh-extra.com/html/snell-and-wilcox/nrs70/nrs70_operators-manual_1309059070.webp)
NRS70 Series
SECTION 5
NRS70OPS
070803 Version 1 Issue 2
www.snellwilcox.com
5.2
3.
Via a PC using the RollCall Templates
The NRS70 may be controlled from a suitable RollCall compatible unit connected to the RollCall network.
This configuration is shown below:
RollCall
Gateway
Card
R
o
llC
a
ll
n
e
tw
o
rk
Control via PC
with Templates
Control via Active
Front panel
setup
lock
save
recall
modules
help
adjust
scroll
power
previous
return
home
control
information
display
select
NRS70 Electronics
NRS70 Front Panel
composite
input
hue
black level
audio
genlock
a
a
b
b
YC
Y gain
memory
browse
C gain
setup
SDI
NRS70
NOISE REDUCER
scroll
adjust
home
previous
return
hold for
menu
threshold
enhance
noise reduce
level
The following methods may be used to disconnect a front panel:
A. Using the Controlling Unit
The new controlling unit (PC, Active Front Panel etc.) in
Supervisor Mode
may be used to disconnect the
control from the NRS70 front panel
. For details of this operation please consult the Operating manual for
the controlling unit.
B. Using the NRS70 to reconnect the front panel or disconnect from a remote session
Hold down the Y Gain and Black Level buttons.
This will reveal the following display:
Select
Clear
and the front panel, the name of the
controlling unit as in line 3 above, will be
disconnected.
NRS70
Unit held by……….
Name of controlling unit
Clear
OK