![background image](http://html.mh-extra.com/html/snell-and-wilcox/nrs70/nrs70_operators-manual_1309059040.webp)
NRS70 Series
SECTION 4
NRS70OPS
070803 Version 1 Issue 2
www.snellwilcox.com
4.16
◀
Split Screen
This function allows the effects of noise reduction
to be easily seen by splitting the screen in half.
One half will show the picture with noise reduction
and the other half without noise reduction.
Split Screen
Split Screen Off
Left Right
Top Bottom
◀
◀
◀
◀
Off This disables the split screen function.
◀
◀
◀
◀
Left/Right
When enabled, the screen will be split into two
equal sections separated by a vertical white line.
The processed picture will occupy the left hand
section of the screen and the unprocessed picture
will occupy the right hand side section.
◀
◀
◀
◀
Top/Bottom
When enabled, the screen will be split into two
equal sections separated by a horizontal white line.
The processed picture will occupy the bottom
section of the screen and the unprocessed picture
will occupy the top section.
MEMORY
◀
Memories
This function allows a number of setups of the
NRS70 to be saved, recalled, cleared and
renamed. There are 8 memory locations available.
Memories
Recall...
Clear...
Save...
Name...
◀
◀
◀
◀
Recall…
This will reveal a list of the memory locations.
Recall
Recall M1
Recall M3
Recall M5
Recall M7
Recall M2
Recall M4
Recall M6
Recall M8
Selecting a memory location will recall the settings
stored in the selected memory location and apply
them to the unit.
Save…
▶
This will reveal a list of the memory locations.
Save
Save M1
Save M3
Save M5
Save M7
Save M2
Save M4
Save M6
Save M8
Selecting a memory location will save the settings
and store them in the selected memory location.
◀
◀
◀
◀
Clear…
This will reveal a list of the memory locations.
Clear
Clear M1
Clear M3
Clear M5
Clear M7
Clear M2
Clear M4
Clear M6
Clear M8
Selecting a memory location will clear the settings
stored in the selected memory location and return
them to the factory default settings.
Name…
▶
This will reveal a list of the memory locations and
allow the naming of the selected memory location.
Name
Name M1
Name M3
Name M5
Name M7
Name M2
Name M4
Name M6
Name M8
Name 1 to 8
Name 1 to 8
Clear
Preset
memory 1 to 8 name
OK
To edit the text the right
▶
and left
◀
buttons
adjacent to the upper text line in the menu should be
used to select the position in the text and the
spinwheel used to select the character.
The
◀
Clear
function blanks the selected character.
The
◀
Preset
function loads the default text, for
example, Memory 1.
O.K.
▶
saves the caption text and returns to the
main menu.