NRS70 Series
SECTION 4
NRS70OPS
070803 Version 1 Issue 2
www.snellwilcox.com
4.43
Status (Display Information)
Display Information
This item allows the type of data that is displayed
in the Information area to be chosen.
Default
When this item is selected the display window will
show details about the Input Signal, Reference
signal and the output as shown in the example
below.
EDH
When enabled the information area will display the
number of errors from the time EDH was reset.
The elapsed time in hours, minutes and seconds is
also displayed.
The
In:
data will be as in the default screen.
Meanings are as follows:
EDH:
This is the state of the input error
detection handler.
None
No EDH information present.
OK
No EDH errors.
Err
An EDH error has occurred.
Err:
The number of EDH errors that have
occurred since the last EDH reset.
E-Time:
This is time since EDH was reset
in Hours:Minutes:Seconds.
Preset EDH Stats
This will reset the EDH error count and
the timer shown in the information
window to zero.
Status 1, Status 2
When either of these items are selected the
display window will show details about the Input
Signal and some of the processing controls as
shown in the example below.
Status 1
Status 2
Selecting this item will reset the EDH error count
and the timer shown in the information window, to
zero.
See the Help section on the next page for details of
the abbreviations used in the information area.
