![background image](http://html.mh-extra.com/html/snell-and-wilcox/nrs70/nrs70_operators-manual_1309059035.webp)
NRS70 Series
SECTION 4
NRS70OPS
070803 Version 1 Issue 2
www.snellwilcox.com
4.11
◀
Gain L and Gain R
This function allows the gain of the left and right
channels to be adjusted independently.
Gain L/R
0.00 dB
Preset
Gain L/R
The range of adjustment is ±6 dB in 0.25 dB steps.
Preset is to 0.00 dB.
◀
Invert Left and Invert Right
When enabled these functions will invert the
selected audio signal channel.
Preset is to not inverted.
◀
Mute Left and Mute Right
When enabled these functions will mute the
selected audio signal channel.
Preset is to not muted.
◀
Disable
Selecting this item will disable the embedded
output signal (not the AES output).
Preset is to not disabled.
◀
Default Audio
If the audio signal is absent the output will be set to
this default signal.
625
AutoDetect
Default Audio
Tone
Silence
Disable
This menu function defines what the output signal
will become under these conditions. It can be
either an internally generated
Tone
or
Silence
or
to
Disable
(no signal is embedded).
Preset is to Disable.
◀
◀
◀
◀
Tone Setup
This allows the characteristics of the tone used in
the Default Audio function, to be set.
625
AutoDetect
Tone Setup
Amplitude
Frequency
Right Channel Ident
The frequency and amplitude settings are active on
both left and right channels.
◀
Amplitude
This allows the amplitude of the tone signal to be
set.
Amplitude
0 dBFS
Preset
Amplitude
The range of adjustment is from -30 dBFS to
0 dBFS in steps of 1 dBFS.
(dBFS = decibels Full Scale).
Preset is to -20 dBFS.
◀
Right Channel Ident
When enabled the right channel will be identified
by the signal being muted for 0.5 second every 2.5
seconds.
◀
Frequency
This allows the frequency of the tone signal to be
set.
Frequency
400 Hz
Preset
Frequency
The range of adjustment is from 100 Hz to
10 000 Hz in steps of 100 Hz.
Preset is to 400 Hz.