Snell Advanced Media KudosPro MC1000 Operator'S Manual Download Page 143

Page: 143 / 170

MC1000/MC1000-IQ/MC2000/MC2000-IQ

RollCall Control Panel Channel Operation Screens

Issue 1 Rev 8

Page 143

11.8.3 Invert Phase

The Invert Phase check boxes enable you to invert the phase of the left and right audio
channels. This control is useful for dealing with input audio discrepancies.

11.8.4 Control

•

Tone:

Makes the audio input source a test tone.

•

Silence:

Mutes the audio input source.

•

Use Routing:

Routes the audio output from the audio processor.

For more information about audio routing, see the

Audio Processing Application Note

under

the “Support” tab at:

www.snellgroup.com/products/conversion-and-restoration/conversion/kudospro/

Summary of Contents for KudosPro MC1000











































































































































































Search results

Summary of Contents for KudosPro MC1000

Reviews:

Related manuals for KudosPro MC1000

Brands by name

Popular brands

Snell Advanced Media KudosPro MC1000, Operator'S Manual

Search results

Summary of Contents for KudosPro MC1000

Reviews:

Related manuals for KudosPro MC1000

Brands by name

Popular brands