SnapNrack Series 100 UL, Installation Manual

Page: 25 / 48

1-1/5"
2"
R 0.6"
R 0.5"
R 0.375"
1/2"
3-1/2"
VARIES
1-1/2"
All parts are
mill finish.
L-foot can be
anodized or mill finish
25
Required Tools:
Materials Included In Series 100 10°-45° Tilt Kit:
Other Materials Required:
Technical Standoff Data:
Dimensioned Assembly Dimensioned Standoff Clamp
















(2) 5/16"- 18 X 1" SS HCS Bolt
(2) SnapNrack Standoff Base
(2) SnapNrack Standoff Shaft
(2) SnapNrack Standoff Clamp
(4) 5/16" SS Split Lock Washer
(3) 5/16" X1-1/4" SS HCS Flange Bolt
(1) 5/16" - 18 SS Flat Hex Nut
(2) 5/16" - 18x2" SS HCS Bolt
(2) SnapNrack L Foot
(4) SnapNrack Bonding
Channel Nut
Material 6000 Series Heat
Treated Aluminum
Finish Mill
Design Uplift Load 200 LBS Uplift
Design Ultimate Load 1000 LBS Uplift
Hammer
Roof Marking Crayon
Drill with 1/8" Pilot
Roof Sealant
Torque Driver with Bit Adapter
1/2" Socket Wrench or impact driver
SnapNrack Tool


(1) Spare Standard Rail
(2) 5/16" Lag Screw
(2) 5/16" Washer
(2) Roof Cone Flashing






(2) Rubber Rain Collar










1!
1!
1!
Series 100 UL
10
° - 45° T
ilt Mount