SnapNrack Series 100 UL, Installation Manual

Page: 23 / 48

1-1/2"
VARIES
3-1/2"
1/2"
23
Required Tools:
Materials Included In Series 100 5°-15° Tilt Kit:
Other Materials Required:
Technical Standoff Data:
Dimensioned Assembly



















(2) 5/16"- 18 X 1" SS HCS Bolt
(2) SnapNrack Standoff Base
(2) SnapNrack Standoff Shaft
(2) SnapNrack Standoff Clamp
(4) 5/16" SS Split Lock Washer
(2) 5/16" - 18 X 2" SS HCS Bolt
(2) 5/16" - 18 Flanged Hex Nut
(2) 5/16" - 18 1-1/4" SS HCS Flanged
Bolt
(2) SnapNrack L Foot
Material 6000 Series Heat
Treated Aluminum
Finish Mill
Weight 5.5” Shaft = 0.4 LBS
7” Shaft = 0.5 LBS
8.5” Shaft = 0.6 LBS
Design Uplift Load 200 LBS Uplift
Design Ultimate Load 1000 LBS Uplift
Hammer or Stud Finder
Roof Marking Crayon
Drill with 1/8" Pilot
Roof Sealant
Torque Driver with Bit Adapter
1/2" Socket Wrench or impact
driver


(2) 5/16" Lag Screw
(2) 5/16" Washer
(2) Roof Cone Flashings
1-1/5"
2"
R 0.6"
R 0.5"
R 0.375"
When To Use:
Flat Roof Applications
Dimensioned Standoff Clamp
All parts
are mill finish

(2) SnapNrack Bonding Channel Nut
Note: Drawing is showing only
1 assembly of 2 required for Tilt Kit
(2) Rubber Rain Collar

1!
1!
Series 100 UL
5
° - 15° T
ilt Mount