72
|
Quick Start Guide
|
73
Laser Engraving and Cutting
Remove the engraved paper, and then fasten another provided material on the center of the Laser Engraving/
Cutting Platform.
If you need to fasten thick materials, refer to
5.2.1 Fasten the Material.
You can also fasten materials using other tools.
Make sure the clamp set will not collide with any portions of the machine.
4.2.3 Fasten the Material
Guides & Pictures
/ Snapmaker
4.3 Prepare the G-code File and Start Cutting
Guides & Pictures
/ Snapmaker
1. Download our software the Snapmaker Luban at
https://www.snapmaker.com/download
and install.
Then connect Snapmaker Luban to your machine through the same Wi-Fi network: Enter
Workspace
->
Connection
-> Select
Wi-Fi
-> Click
Refresh
-> Select your machine -> Click
Connect
-> Tap
Yes
on the
Touchscreen
.
2. Click
Back
and open the test file from
Case Library
. Then click
Camera Capture
>
Add Background
, and
click
Start
. Wait for the machine to take photos and stitch them into a panorama of the platform, and then click
Confirm
.
