48
|
Quick Start Guide
|
49
3D Printing
07
/07
Attach the Cable Holder to the Z Axis, and then lock the Toolhead Cable into place.
M4 x 8 Screw
x 2
Cable Holder
x 1
Make sure there is enough cable length
for the toolhead to move.
3.1.2 Initial Setup
Plug the AC Power Cable into an electrical outlet. Switch the power on and follow the prompts on the
touchscreen: Read the Terms -> Name the Machine -> Connect to a Wi-Fi Network.
Guides & Pictures
/ Snapmaker
It is recommended to wait for 5 seconds after you restart your machine.
Skip this step if you have
completed the initial setup.
If you need to change the
settings above, swipe left
on the homepage of the
Touchscreen -> select
Settings
-> tap
Wi-Fi
or
About Machine
as needed.
The initial guide, which
helps you get started, will
appear only once. If you
need to launch it again,
swipe left on the homepage
of the Touchscreen -> select
Settings
-> tap
Guides
.
