68
|
Quick Start Guide
|
69
Laser Engraving and Cutting
How It Works: Work Origin
Find out where the engraving/cutting will take place by setting the Work Origin. The Work Origin corresponds to
the (0, 0) coordinate origin in the software.
How to Measure the Focal Length
1. Place the provided material on the Laser Engraving/Cutting Platform. Secure it with the silicone plugs.
2. Set the thickness of the material (1.5 mm) and tap
Save
.
3. Tap
X-
,
X+
,
Y-
,
Y+
,
Z-
, or
Z+
to move the Laser Module. After the laser camera shade has slightly touched the
surface of the material, tap
Next
. Put on the Laser Safety Goggles before setting the Work Origin.
