Smithco Sand Star Zee 45-501-A, Parts & Service

Page: 57 / 69

55
Accessories
26-007Q PROFESSIONAL INFIELD FINISHER PARTS LIST
REF# PART# DESCRIPTION QUANTITY
1 26-045 Leveling Screen 1
2 HNCL-58-11 Center Lock Nut,
5
/
8
- 11 2
3 HW-58 Flat Washer,
5
/
8
2
4 43-145 Draw bar 1
5 HB-58-11-300 Bolt,
5
/
8
- 11 x 3 2
INSTALLATION INSTRUCTIONS
The Professional Field Finisher is used for smoothing and leveling fields to professional standards.
1� Attach Leveling Screen (Ref� 1) to Draw bar (Ref� 4) using two Hex Bolts (Ref� 5), Center Lock Nuts
(Ref� 2) and Flat Washers� Do not tighten hardware, leave loose for adjustment�
2� Mount the Professional Field Finisher to the hitch on the trap rake by sliding the draw bar into the
quick hitch locking mechanism�
3� To adjust the Leveling Screen move it up or down in the slotted holes� The Leveling Screen should be
level or slightly higher in the front� Tighten hardware (Refs� 2, 3 & 5) to secure to Draw bar�
3� When the Professional Field Finisher is attached, adjust bolts on hitch (Ref A) to hold Finisher in
desired position�
4� NOTE: When assembled properly, rake will angle down from front to back. If front of finisher is not
higher than the back, damage will result to infield.
5� When removing the attachment from machine� Push down on quick hitch locking mechanism and pull
accessory out�