Smithco Sand Star Zee 45-501-A, Parts & Service

Page: 15 / 69

13
Ser
vice
ADJUSTMENTS
CENTER LIFT
Using the foot pedal on the left floorboard and the center lift lever you
can raise and lower the center lift� To lift, push right foot pedal all the
way down and the center lift lever will lock into place� To lower, place
pressure on the foot pedal, place detent pin in hole for correct depth
you are trying to obtain, push center lift lever inward and release ped-
al� Detent pin will stop center lift at selected depth�
PARK BRAKE
The park brake is located on the left side of the machine and oper-
ates the brakes on the rear wheels� Push lever forward to dis-engage
and pull back to engage�
To adjust turn the knob on the end of the handle� For further adjust-
ment you may turn the yokes clockwise to tighten and counter clock-
wise to loosen�
ELECTRIC/HYDRAULIC REAR LIFT (45-501)
To lift and lower the rear attachments on the 45-501, use
the rocker switch on the right control lever� Pushing the
switch up will raise the rear attachment� Pushing the rock-
er switch down will lower the rear attachment�
ADJUSTMENT OF BELT TENSIONER
The belt tensioner controls the tension on the belt from
the engine to the left and right hydro units� The proper
tension of the idler should be in the third notch on the
side of the tensioner� Over tightening the belt will shorten
the life of the belt and the machine may not perform to
the best of its ability� To adjust belt tensioner, loosen the
bolt holding the tensioner� Bring idler pulley tight to the
belt and turn tensioner into belt to the third notch� Us-
ing a pair of channel lock pliers, rotate the upper half of
the tensioner clockwise until the indicator is at the third
notch� Tighten bolt on tensioner�
Rear Electric Lift
Rocker Switch