Smithco Sand Star Zee 45-501-A, Parts & Service

Page: 12 / 69

10
Introduction
DAILY CHECKLIST
Follow all procedures and ONLY use parts prescribed by the manufacturer�
Read the engine manual before maintenance��
Before servicing or making adjustments to the machine, stop engine, set park
break, block wheels and remove key from ignition�
DAILY CHECKLIST
1� Check park brake adjustment� Adjust as required�
2� Check engine oil level� Add as needed� DO NOT OVERFILL�
3� Tire pressure should be 5 psi (0�34 bar) maximum on rear tires and 20 psi (1�38 bar) on the front tire�
4� Inspect electrical system for loose connections or frayed wiring, including battery cables� Replace any
faulty equipment or tighten if loose�
5� Check hardware for loose or missing nuts, bolts, screws, etc�, and tighten or replace as needed�
6� Inspect hydraulic lines for damage or leaks� Never use hands to inspect leaks�
7� Check hydraulic oil level on the tank� The level should be
1-3" from the bottom of the dipstick� If level is
low, Parker Dura Clean Hydraulic Oil or Equivalent of AW32 minimum hydraulic oil�
8� Inspect steering control levers, throttle and shift linkages for good hookups and clear travel�
9� Check controls for smooth, proper working operation�