22
DISPLAYED MESSAGES
DISPLAYED MESSAGE
POSSIBLE CAUSE
REMEDY
FILL WATER TANK WITH
FRESH WATER
Water in the tank (A12) is not sufficient.
Fill the tank with water and/or insert it correctly,
pushing it as far as it will go until it clicks into place.
EMPTY GROUND CONTAINER
The grounds container (A4) is full.
Empty the grounds container and drip tray (A14),
clean and then replace them. Important: when re-
moving the drip tray, the grounds container must
always be emptied, even if it contains few grounds. If
this is not done, when you make the next coffees, the
grounds container may fill up more than expected
and clog the machine.
INSERT GROUND CONTAINER
After cleaning, the grounds container
(A4),has not been replaced.
Remove the drip tray (A14) and insert the grounds
container.
ADD PRE-GROUND COFFEE
PRE-GROUND MAXIMUM
ONE MEASURING CUP
The "pre-ground coffee" function has
been selected, but without placing any
pre-ground coffee in the funnel (A21).
Place pre-ground coffee in the funnel (fig. 14) and
repeat delivery
The funnel (A21) for pre-ground coffee, is
clogged.
Empty the funnel with the help of the brush (C5) as
described in par. "Cleaning the pre-ground coffee
funnel".
