28
PROBLEM
POSSIBLE CAUSE
REMEDY
The milk does not come out of the
milk spout (D5)
The lid (D2) of the milk container (D)
is dirty
Clean the milk container lid as described in par.
"Cleaning the milk container".
The milk contains large bubbles and
squirts out of the milk spout (D5) or
there is little froth
The milk is not cold enough or is not
semi-skimmed or skimmed.
Use fully skimmed or semi-skimmed milk at
refrigerator temperature (about 5° C). If the
result is not as you wished, try changing brand
of milk.
The froth adjustment dial (D1) is incor-
rectly adjusted.
Adjust following the instructions in section
“Adjusting the amount of froth”.
The milk container lid (D2) or froth ad-
justment dial (D1) is dirty
Clean the milk container lid and froth adjust-
ment dial as described in par. "Cleaning the
milk container".
The hot water/steam connection noz-
zle (A13) is dirty
Clean the connection nozzle as described in
par. "Cleaning the hot water/steam connec-
tion nozzle".
The machine emits noises or small
puffs of steam while not in use
The machine is ready for use, or has re-
cently been turned off, and condensate
is dripping into the vaporiser which is
still hot
This is part of normal operation.To limit this,
empty the drip tray.