background image

12

Light 

 

This function enables or disables the lights (A6). The cup  lights   
(A18) come on each time coffee beverages are produced, hot 
milk is made and during each rinse cycle and turn off after a few 
seconds.
To disable or enable this function, proceed as follows:
1. Press   (B2) to enter the menu;
2.  Press  

 (B10) or 

 (B8) until the display (B) shows 

  LIGHT;

3. Press   to enable-

 or disable-

  the 

cup lighting;

4. Press 

 to go back to the homepage.

 

Please note: 

The lighting to illuminate the interior com-

partment A6 comes on when the appliance is turned on.

Models with knobs

: it is possible to enables or disables

 

the 

lights (A6) by turning the knob (A25).

Demo mode 

By enabling this mode, the main functions of the machine are 

shown on the display:
1. Press   (B2) to enter the menu;
2. Press   (B10) or 

 (B8) until the display shows 

  

DEMO  MODE;

3.  Press "

" to start the demo;

4.  To exit from the DEMO MODE, first turn the appliance off 

by pressing the button 

 (A7). Press again the button

 to go back to the homepage.

Default values  

This resets all menu settings and programmed quantities back 
to the default values (with the exception of the language which 
remains as set).
To reset the default values, proceed as follows:
1. Press   (B2) to enter the menu;
2. Press   (B10) or 

 (B8) until the display (B) shows 

  DEFAULT VALUES.  Press 

 ;

3. Press   RESET ALL to reset all the profiles to the 

original parameters, otherwise select the required profile 
(e.g. USER1); 

4.  RETURN TO FACTORY SETTINGS? RESET ALL: press 

 

to confirm (or  

 to leave parameters unaltered);

5.  FACTORY SETTINGS SET : press 

 to confirm.

Statistics 

This function displays statistical data relating to the machine. To 
display the statistics, proceed as follows:

1. Press   (B2) to enter the menu;
2. Press   (B10) or 

 (B8) until the display (B) shows 

 STATISTICS ;

3. Press   : it is possible to check all the available statistics 

by pressing 

 or 

;

4. Press 

 : to go back to the homepage.

MAKING COFFEE

 

(see recipes on page 29)

Selecting the coffee aroma

Select the required aroma from the homepage by pressing 

 AROMA (B6):

(see “Making coffee using 
pre-ground coffee”)
AROMA EXTRA LIGHT

LIGHT AROMA

MEDIUM AROMA

STRONG AROMA

X-STRONG AROMA

Custom (if programmed) / 
Standard

After delivering the beverage, the aroma setting is reset to the 

 value.

Selecting the coffee quantity

From the homepage select the required quantity of coffee in the 
cup by pressing 

 QUANTITY  (B7):

SMALL SIZE (SMALL)

MEDIUM SIZE (MEDIUM)

LARGE SIZE (LARGE)

X-LARGE SIZE 
(EXTRA LARGE)
Custom quantity (if pro-
grammed) / Standard 
quantity

After delivering the beverage, the quantity setting is reset to the 

 value.

Summary of Contents for CMS4604




































Reviews: