Sentry 5000-32-IT Controller
Page 55 of 82
8.7
Calibration Management
The controller provides for gas detection system calibration to be implemented in various methods to suit
the specific application. These methods include:
•
Remote Calibration
– Allows calibration of sensor modules only (typically used for Analog Input
or PSG sensors). Since the modules have their own individual settings the Sentry IT Controller
does not need to be updated with device/sensor calibration information. However, device/sensor
calibration status and other information can be updated on the controller via Remote Calibration
and then subsequently updated via the Sentry IT Controller. (
•
Sentry IT GlobalCal (typically used for Modbus or PSG sensor modules) has various modes that
allows different ways to calibrate:
o
GlobalCal All
– Calibrate all sensor modules (
Section
o
GlobalCal Gas Type
– Calibrate all sensor modules of one gas type (
Section
o
GlobalCal Select Modules
– Calibrate any selected sensor modules (
Section
o
GlobalCal Select Zones
– Calibrate by Zone requires Commander logic zone configuration
(
These methods are described in more detail in the following sections.
Calibration Management
Calibration Menu
Summary of Contents for Sentry 5000-32-IT
