Sentry 5000-32-IT Controller
Page 26 of 82
4
INSTALLATION
4.1
Site Planning
Prior to installation of the controller a site plan should be prepared to indicate the location of all system
components including the controller, sensor modules and annunciators. The site plan must also provide
cable, conduit or wire tray locations and routing. The scope of this manual covers installation and wiring
of the controller.
4.2
Controller Location
Determine the location for mounting the controller. Preferably this is a flat wall with sufficient vertical
space to install the controller with the graphic panel (GUI) at eye height. The wiring entry is to be via the
downward facing panel. Provide sufficient clear wall space on the wall for the door to open. The
approximate linear wall space required is 30” and the vertical space is approximately 75”.
This section describes the Platform for a painted steel wall mount enclosure. Optional Platform designs,
such as rack mount versions contain the same components, but the components may be located in
different positions.
4.3
Controller Mounting
Prior to mounting the controller, remove the conduit entry flange from the downward facing side of the
enclosure and punch conduit entry holes of size and position as required for the conduit entry. If possible,
reinstall the conduit flange prior to wall mounting the controller. Determine the appropriate wall position
for the controller and mark the four mounting positions at 12” on center horizontal and 19.75” on center
vertical.
Use ½” bolts or lag screws with appropriate washers to attach the controller to the vertical
surface. The controller should be positioned for ease of viewing and operating the TPC operator interface.
Summary of Contents for Sentry 5000-32-IT
