11
Specifications
Note1) With cycles at 2 Hz or more.
Note2) After initial suction of liquid operating at 1 to 7 Hz, it can be used with operation at lower cycles. Since a large
quantity of liquid will be pumped out, use a suitable throttle in the discharge port if problems occur.
Note3) With a low number of operating cycles, even a valve with a small Cv factor can be operated.
Note4) These are reference values given for rated temperature and tap water and are not guaranteed. Refer to page
P.8 for details.
Model
PA5013-
□
04
PA5013-
□
06
Actuation
Automatically operated
Port size
Main fluid
suction
discharge port
Rc, NPT, G, Female thread
1/2
”
3/4"
Pilot air
supply/exhaust
port
Rc, NPT, G 1/4" Female thread
Material
Body wetted
areas
PP
Diaphragm
PTFE
Check valve
PTFE, PP, PFA
Liquid contact
seals
FFKM
Fluid
Refer to P.11 for applicable fluids
Discharge rate
1 to 45 L/min
1 to 50 L/min
Average discharge pressure
0 to 0.4 MPa
Pilot air pressure
0.2 to 0.5 MPa
Air consumption
Refer to P.14 for air consumption
Suction
lifting
range
Note1)
Dry
Up to 0.5 m (Interior of pump dry)
Wet
Up to 6 m (liquid inside pump)
Noise
75 dB (A) or less
(excluding the noise from the quick exhaust and solenoid valve)
Maximum withstand pressure
0.75 MPa
Diaphragm life
Note4)
50 million times
Fluid temperature
0 to 60 °C (No freezing)
Ambient temperature
0 to 60 °C (No freezing)
Maximum viscosity
5000 mPa
･
s
Recommended operating
cycle
1 to 7 Hz (0.2 to 1 Hz also possible depending on conditions)
Note 2)
Pilot air solenoid valve
recommended Cv factor
Note3)
0.45
Weight
3.0 kg
Mounting orientation
Horizontal (with mounting foot at bottom)
Packaging
General environment
