-
32
-
No.JXC
※
-OMU0030-A
3) Move to the position to be registered with the Jog or
Inching operation using the Forward button (i) or
Reverse button (j).
Inching starts by pressing either the Forward button
(i) or Reverse button (j).
Jog starts by holding down either the Forward button
(i) or Reverse button (j).
For further details, refer to
”
8.3 Jog operation /
inching operation”
.
4) Keep pressing the set button (g) from solid light state
of the 7-segment LED (f) until it stays on to indicate
registration of the position.
When the position is registered and set button (g) is
released, 7-segment LED (f) returns to the flashing
state.
Registering the position by jog operation / inching operation is completed.
Caution
If you perform jog / inching operation before the servo is turned on (Power supply LED (a) lights up
in green), an alarm is generated. Perform jog / inching operation after confirming that the servo is
turned on.
(i)
(j)
(f)
(g)