SMC Networks LECP2 D Series, Operation Manual, Page: 15 / 67

-
14
-
No.JXC
※
-OMU0030-A
3.2 Parts description
The detailed descriptions of each part are as follows:
No. Display Description Details
(a) PWR
Power
supply LED
Power supply ON / Servo ON: Green turns on
Power supply ON / Servo OFF: Green flashes
(b) ALM
Alarm LED
Power supply ON / With alarm: Red flashes
Power supply ON / Un-performing of Stroke study
：
Flashes in red
Power supply ON / Parameter setting: Red flashes
(c)
―
Cover
Protection of the mode switch changing.
(Close the cover after changing swich).
(d)
―
FG
Frame ground
(Tighten the bolt with the nut when mounting the
controller. Connect the grounding wire.)
(e)
―
Mode switch
Swich the mode between manual and auto.
(f)
―
7-segment
LED
Auto mode / Without alarm:
Indicates the position number which is command
by ON/OFF of IN0 to IN3 of the CN4 parallel I/O.
(During command operation: Flashing / Instruction
command completed: ON)
Auto mode / With alarm:
Indicates Alarm Group.
Manual mode: Indicates that content may vary
depending on the operating function.
(g) SET
Set button
Determines the settings and gives a command to
operate in manual mode.
(h)
―
Position
switch
Assigns the position to drive (1 to 14).
(i)
MAN
UAL
Forward
button
Performs forward jog and inching.
(j)
Reverse
button
Performs reverse jog and inching.
(k)
SPEED
Forward
speed switch
16 forward speeds are available.
*1)
(l)
Reverse
speed switch
16 reverse speeds are available.
*1)
(m)
ACCEL
Forward
acceleration
switch
16 forward acceleration steps are available.
*1)
(n)
Reverse
acceleration
switch
16 reverse acceleration steps are available.
*1)
(o) CN1
Power
supply
connector
Connect the power supply cable.
(p) CN2
Motor driving
connector
Connect motor connector of actuator cable.
(q) CN3
Encoder
connector
Connect encoder connector of actuator cable.
(r) CN4
I/O
connector
Connect I/O cable.
*1) The Set value of speed and acceleration are set for reverse and forward
directions.
The set value will be reflected in the operation of all position numbers.
(e) (d) (c)
(a)
(b)
(h)
(j)
(l)
(n)
(f)
(g)
(i)
(k)
(m)
(r)
(q)
(p)
(o)