![background image](http://html1.mh-extra.com/html/smc-networks/idfa6e-20-a/idfa6e-20-a_operation-manual_1299719040.webp)
IDX-OM-W089
Air Dryer
13 Specification for Option R
IDFA6E-20 13 - 2 13-2 Specifications of the GFCI
13-2 Specifications of the GFCI
Dryer model number
Specifications of GFCI
IDFA6E-20-
□
R
□
Rated current: 5A, Current sensitivity: 30mA
13-3 How to connect the power supply
Connect the power cables in the following procedure.
1) Take off the rear panel.
2) Insert the power cable prepared by the customer into the power code fixture and bring the
power cable near the terminal base through the base hole.
3) Connect the power cable to the terminal of the GFCI.
4) Put back the rear panel.
※
Please refer to page 6-3 or 14-3 for the electrical diagram.
L
N
Power cable is connected.
Connector width
:
9.5mm or less
Terminal connection screw: M5
Acceptable electric wire: 1.25mm
2
Connect to earth cable
Connector width
:
6.5mm or less
Terminal connection screw
:
M3
Acceptable electric wire:
:
1.25mm
2
Rear panel
GFCI
Electrical
entry
端子台
Summary of Contents for IDFA6E-20-A
Page 47: ......