![background image](http://html1.mh-extra.com/html/smc-networks/idfa6e-20-a/idfa6e-20-a_operation-manual_1299719019.webp)
Air Dryer
3 Operation / Shutdown
IDFA6E-20
3 - 2
3-3
Shutdown
IDX-OM-W089
3-3
Shutdown
•
Turn off the ON/OFF switch.
•
The lamp will go out and then, the operation will stop. Depending on the condition of operation, hot
air continues to be emitted from the ventilation grille by the cooling fan for a while after turning off the
switch.
3-4
Cautions about restart
•
Wait at least 3 minutes before restarting the air dryer after it has been shut down. Failure to do this
may cause safety devices to trip due to over load.
3-5
Check points before restart
Check following points before you start operation. If any abnormalities occur, immediately stop the operation.
Turn off the illuminated switch of the product and then the breaker to the power supply.
•
There is no leakage of compressed air.
•
Compressed air pressure, temperature, flow rate, and ambient temperature meet the specifications.
•
Drain is being discharged from the drain tube.
•
The pointer of evaporation thermometer is indicating in the green zone.
•
There are no abnormal sound, vibration, or smelling.
3-6
Precautions for long-term -non-operation
•
If the product will not be operated
for more than 24 hours, for example at the weekend, turn off the ILS (switch
with lamp) or power supply, for energy saving and safety. It is also recommended to release the pressure
inside the compressed air piping and this air dryer.
Summary of Contents for IDFA6E-20-A
Page 47: ......