SMC Networks HRSH150-A*-20 Series, Operation Manual

Page: 64 / 178

HRX-OM-Q026-B
Chapter 5 Display and setting of various functions
5.1
Function HRSH Series
5-4
5.1.2 List of parameters
Table 5.1-1“List of parameter (1/3)” and Table 5.1-3“List of parameter (3/3)”
show the parameters of the thermo-chiller.
Table 5.1-1 List of parameter (1/3)
Display Content Default setting
∗
1
Reference
page
Category
Circulating fluid temperature(TEMP PV)
Temperature
Circulating fluid set temperature(TEMP SV) 20
℃
(68
゜
F)
Circulating fluid outlet pressure
Unused
5.2
Main display
X X
Alarm No. 5.3
Alarm
display
menu
Circulating fluid outlet temperature
Circulating fluid return port temperature
Temperature of the compressor inlet.
Circulating fluid outlet pressure
Pressure of higher pressure refrigerant circuit
Pressure of lower pressure refrigerant circuit
Unused
Accumulated operation time of the pump
Accumulated operation time of the fun
Accumulated operation time of the
compressor
Accumulated operation time
Accumulated operation time of the
dust-proof filter
5.4
Check
monitor
menu
Key-lock OFF 5.5
Run timer 0.0H
Stop timer 0.0H
5.6
READY mode OFF
READY band width ---- (0
o
C (0
ﾟ
F)
∗
2
READY time ---- (10)
∗
2
5.7
Offset mode OFF
Offset temperature ---- (0
o
C (0 ﾟ F)
∗
3
5.8
Recover from power failure OFF 5.9
Anti-freezing function OFF 5.10
Key click sound ON 5.11
Temperature unit C 5.12
Pressure unit MPa 5.13
Data reset NO 5.14
Pump accumulated operating time reset
NO
Fun accumulated operating time reset
NO
Compressor accumulated operating time
reset
NO
5.15
Unused ----
Unused
----
Unused
----
Unused
----
Unused
----
Unused
----
Setting
menu
∗
1: Values in ﾟ F are displayed when SE12 is F.
∗2
: The default setting when SE04 is ON.
∗
3: The default setting when SE07 is MD1, 2 or 3.