T slots on the bottom
Mounting holes on the top
7
Gener
al
3 positions
5 positions
Gener
al
6
Gener
al
3 positions
5 positions
Gener
al
Description
Slider
Motor
Power supply cable
I/O cable
Controller
FG terminal
Content/Function
The parts which can move in the actuator
The motor to move the actuator
The power supply line to drive the actuator
The signal line to transmit signal of positioning
completion and command for drive
The unit to control, set and indicate the actuator
The terminal to connect FG cable
Encoder cable of the actuator
Encoder cable connecting the actuator and the controller
Motor cable of the actuator
Motor cable connecting the actuator and the controller
Encoder cable of the controller
Encoder cable to separate the controller
Motor cable of the controller
Motor cable to separate the controller
I/O cable
Power supply cable
Controller
Motor
Slider
FG terminal
Motor side
End side
Names and Functions of Individual Parts
Controller integrated type
Encoder cable of
the controller
I/O cable
Encoder connecting
connector
Motor connecting
connector
Power supply cable
Motor cable of
the controller
Encoder cable of
the actuator
Motor cable of
the actuator
Controller separated type
Installation
Read "Precautions for Handling" of safety Instruction and "How to install" of this chapter with care
to provide safe and exact measurement for installation of the actuator.
Installation of body
Use 4 mounting holes on the top of the body or nuts inside 2 T slots on the bottom of the body for
installation.
Mounting holes on the top
T slots on the bottom
Front view
Bottom view
Nominal of actuator
16
25
Thread size
M3
M5
Nominal of actuator
16
25
Thread size
M3
M5
Effective length
4 to 5mm
6 to 8mm
•If T slots on the bottom is used for installation,
select screw which enables only effective
length of it to enter from the bottom.
Model
E-MY2C
E-MY2H
16
25
M5
M8
E-MY2HT
Model
E-MY2C
E-MY2H
16
25
M4
M6
6 to 7mm
8 to 10mm
E-MY2HT
