5
Gener
al
3 positions
5 positions
Gener
al
4
Gener
al
3 positions
5 positions
Gener
al
SAFETY (continue)
NOTE
Follow the instructions given below when handling your actuator. Otherwise, the switch may be
damaged or may fail, thereby resulting in malfunction.
•Use at voltage over specified voltage.
•Do not apply the load over max.
•Keep the resistance of the attached equipment not more than the allowable resistance.
•Keep the space for maintenance.
•Do not drop and collide the product or give excessive impact to it.
•Hold the body for handling.
•Keep tightening torque.
•Do not install the actuator to the place used as foot base for work.
•Keep flatness of mounting face for actuator within 0.1/500mm.
•Do not give repeated bending and tensile force to the connected cable to prevent the breakage of
the cable.
•Connect wiring properly.
•Do not energize the product during wiring.
•Do not use in the place with dust, particle and splash of water, chemicals and oil to prevent
breakage and malfunction of the product.
•Do not use in the place creating magnetic field to prevent the malfunction of the actuator.
•Do not use in the environment subject to temperature cycle.
•Do not use where close to surge generating source.
•Do not short the load. Short of the load of the controller is indicated as error, but it may cause
over current and break the actuator.
•Do not push setting buttons with the pointed staff to avoid the damage of the buttons.
•Perform maintenance for the product periodically.
Model Indication Method
E-MY2 C 16
100
TA
N
A
M
M9B
Guide Type
C
Cam follower guide type
H
Linear guide
single axis type
Positioning stop number
Nil
3 positions
A
5 positions
Nominal size
16
25
Stroke
Auto switch
Number of
auto switches
Cable length
Nil
M
L
Z
Controller integrated type
Controller
separated
type
1m
3m
5m
Motor placement
TA
DA
TB
DB
On the top, (left)
On the bottom, (left)
On the top, (right)
On the bottom, (right)
Output type
N
NPN
P
PNP
Options
•Controller mount bracket
•L type bracket
••••••
MYE-LB Hexagon socket head screw M5 x 8 (2)
•DIN rail bracket
••••
MYE-DB Cross recessed panhead screw M3 x 6.5 (2)
Clamp screw M4 x 10 (1)
Bracket
Hexagon socket
head screw
Clamp screw
Cross recessed
panhead screw
Bracket
L type bracket
(MYE-LB)
DIN rail bracket
(MYE-DB)
Note) Refter to the catalog for Stroke, Auto switch and Number of auto switches.
HT
Linear guide
double axis type
Speed type
L
M
Nil
Low speed
Medium speed
Standard speed
Load type
Q
Nil
E
D
Heavy load
Standard load
Medium load
Light load
H
High speed
