C
HAPTER
5
| Operation Mode
Logging In
– 44 –
L
OGGING
I
N
It is recommended to make initial configuration changes by connecting a
PC directly to the wireless 3G Broadband Router's LAN port. The wireless
3G Broadband Router has a default IP address of 192.168.2.1 and a subnet
mask of 255.255.255.0. If your PC is set to “Obtain an IP address
automatically” (that is, set as a DHCP client), you can connect immediately
to the web interface. Otherwise, you must set your PC IP address to be on
the same subnet as the wireless 3G Broadband Router (that is, the PC and
wireless 3G Broadband Router addresses must both start 192.168.2.x).
To access the configuration menu, follow these steps:
1.
Use your web browser to connect to the management interface using
the default IP address of 192.168.2.1.
2.
Log into the wireless 3G Broadband Router management interface by
entering the default user name “admin” and password “smcadmin,”
then click OK.
N
OTE
:
It is strongly recommended to change the default password the first
time you access the web interface. For information on changing passwords,
see
“Administration Settings” on page 97
.
Figure 20: Logging On
Summary of Contents for Barricade SMCWBR14S-3GN
Page 1: ...BarricadeTM N Draft 11n Wireless 3G Broadband Router SMCWBR14S 3GN USER GUIDE ...
Page 10: ...ABOUT THIS GUIDE 10 DECEMBER 2009 REVISION This is the first revision of this guide ...
Page 14: ...CONTENTS 14 C LICENSE INFORMATION 115 The GNU General Public License 115 ...
Page 126: ...SMCWBR14S 3GN ...