C
HAPTER
8
| Firewall Configuration
MAC/IP/Port Filtering
– 90 –
Figure 56: MAC/IP/Port Filtering
The following items are displayed on this page:
◆
MAC/IP/Port Filtering
— Enables or disables MAC/IP/Port Filtering.
(Default: Disabled)
◆
Default Policy
— When MAC/IP/Port Filtering is enabled, the default
policy will be enabled. If you set the default policy to “Dropped”, all
incoming packets that don’t match the rules will be dropped. If the
policy is set to "Accepted," all incoming packets that don't match the
rules are accepted. (Default: Dropped)
◆
MAC Address
— Specifies the MAC address to block or allow traffic
from.
◆
Destination IP Address
— Specifies the destination IP address to
block or allow traffic from.
◆
Source IP Address
— Specifies the source IP address to block or allow
traffic from.
Summary of Contents for Barricade SMCWBR14S-3GN
Page 1: ...BarricadeTM N Draft 11n Wireless 3G Broadband Router SMCWBR14S 3GN USER GUIDE ...
Page 10: ...ABOUT THIS GUIDE 10 DECEMBER 2009 REVISION This is the first revision of this guide ...
Page 14: ...CONTENTS 14 C LICENSE INFORMATION 115 The GNU General Public License 115 ...
Page 126: ...SMCWBR14S 3GN ...