C
HAPTER
2
| Installing the wireless 3G Broadband Router
Bridge Mode Connections
– 23 –
4.
Set up wireless devices by pressing the WPS button on the wireless 3G
Broadband Router or by using the web interface.
See “Initial
Configuration” on page 29
for more information on accessing the web
interface.
B
RIDGE
M
ODE
C
ONNECTIONS
In Bridge Mode, the wireless 3G Broadband Router operates as a wireless
access point, extending a local wired network to associated wireless clients
(PCs or notebooks with wireless capability). From any nearby location, you
can then make a wireless connection to the wireless 3G Broadband Router
and access the wired network resources, including local servers and the
Internet.
In Bridge Mode, the wireless 3G Broadband Router does not support
gateway functions on its WAN port. Both the LAN port and the WAN ports
can be connected to a local Ethernet LAN.
N
OTE
:
Bridge Mode is not the factory default mode and must be manually
set using the web management interface.
Figure 4: Bridge Mode Connection
To connect the wireless 3G Broadband Router for use as an access point,
follow these steps:
1.
Using Ethernet cable connect the wireless 3G Broadband Router’s LAN
and WAN ports to PCs. Alternatively, you can connect to a workgroup
switch to support more wired users.
2.
Power on the wireless 3G Broadband Router by connecting the AC
power adapter and plugging it into a power source.
3.
Set up wireless
devices
Notebook PC
2.
Connect LAN port
to PC
2.
Connect AC power
adapter to
power source
1.
Connect LAN and WAN
ports to an Ethernet LAN
switch or PCs
Summary of Contents for Barricade SMCWBR14S-3GN
Page 1: ...BarricadeTM N Draft 11n Wireless 3G Broadband Router SMCWBR14S 3GN USER GUIDE ...
Page 10: ...ABOUT THIS GUIDE 10 DECEMBER 2009 REVISION This is the first revision of this guide ...
Page 14: ...CONTENTS 14 C LICENSE INFORMATION 115 The GNU General Public License 115 ...
Page 126: ...SMCWBR14S 3GN ...