![background image](http://html.mh-extra.com/html/smc-networks/barricade-smcwbr14s-3gn/barricade-smcwbr14s-3gn_user-manual_1300060084.webp)
C
HAPTER
7
| Wireless Configuration
Wireless Distribution System (WDS)
– 84 –
Figure 51: WDS Configuration Example
A WDS link between two units can be configured in any of the following
Operation Mode combinations:
1.
Both units in a link are configured as Router Mode.
2.
One unit in a link is configured in Router Mode and the other in Bridge
Mode.
3.
Both units in a link are configured as Bridge Mode.
When two or more units in the WDS network are set to Router Mode, be
sure to check these settings:
◆
Be sure each unit is configured with a different LAN IP address.
◆
Be sure that only one unit has an Internet access on its WAN port.
◆
Be sure the DHCP server is enabled only on one unit. When one unit is
providing Internet access, enable the DHCP server on that unit.
N
OTE
:
When using WDS Lazy mode in the network, at least one unit must
be set to Bridge or Repeater mode.
Summary of Contents for Barricade SMCWBR14S-3GN
Page 1: ...BarricadeTM N Draft 11n Wireless 3G Broadband Router SMCWBR14S 3GN USER GUIDE ...
Page 10: ...ABOUT THIS GUIDE 10 DECEMBER 2009 REVISION This is the first revision of this guide ...
Page 14: ...CONTENTS 14 C LICENSE INFORMATION 115 The GNU General Public License 115 ...
Page 126: ...SMCWBR14S 3GN ...