C
HAPTER
6
| Network Settings
WAN Setting
– 54 –
◆
Default Gateway
— The IP address of the gateway router for the
wireless 3G Broadband Router, which is used if the requested
destination address is not on the local subnet.
◆
Operation Mode
— Selects the operation mode as Keep Alive, or
Manual. (Default: Keep Alive)
■
Keep Alive Mode
: The wireless 3G Broadband Router will
periodically check your Internet connection and automatically re-
establish your connection when disconnected. (Default: 60 seconds)
■
Manual Mode
: The unit will remain connected to the Internet
without disconnecting.
3G
Enables support for a USB 3G modem as a WAN connection, either as a
primary (Master) link, or as a backup to the WAN port link.
Figure 28: 3G Configuration - Dual WAN Mode
The following items are displayed in this section on this page:
◆
USB Port
— Enables support for a WAN connection using a USB 3G
modem. When enabled, you can select if the 3G modem connection
operates as the Master or Backup WAN link. (Default: Disabled)
◆
Master WAN
— Enables the USB 3G modem WAN connection to
operate as the primary WAN link. The Ethernet WAN port then operates
as the backup link. (Default: Disabled)
◆
Backup WAN
— Enables the USB 3G modem WAN connection to
operate as the backup to the Ethernet WAN port link.
(Default: Enabled)
Summary of Contents for Barricade SMCWBR14S-3GN
Page 1: ...BarricadeTM N Draft 11n Wireless 3G Broadband Router SMCWBR14S 3GN USER GUIDE ...
Page 10: ...ABOUT THIS GUIDE 10 DECEMBER 2009 REVISION This is the first revision of this guide ...
Page 14: ...CONTENTS 14 C LICENSE INFORMATION 115 The GNU General Public License 115 ...
Page 126: ...SMCWBR14S 3GN ...