C
HAPTER
6
| Network Settings
WAN Setting
– 52 –
The following items are displayed on this page:
◆
Server IP
— Sets the L2TP server IP Address. (Default: l2tp_server)
◆
User Name
— Sets the L2TP user name for the WAN port.
(Default: l2tp_user; Range: 1~32 characters)
◆
Password
— Sets a L2TP password for the WAN port. (Default:
l2tp_password; Range: 1~32 characters)
◆
Verify Password
— Prompts you to re-enter your chosen password.
◆
Address Mode
— Sets a L2TP network mode. (Default: Static)
◆
IP Address
— Sets the static IP address. (Default: 0.0.0.0, available
when L2TP Network Mode is set to static IP.)
◆
Subnet Mask
— Sets the static IP subnet mask. (Default:
255.255.255.0, available when L2TP Network Mode is set to static IP.)
◆
Default Gateway
— The IP address of the gateway router for the
wireless 3G Broadband Router, which is used if the requested
destination address is not on the local subnet.
◆
Operation Mode
— Selects the operation mode as Keep Alive, or
Manual. (Default: Keep Alive)
■
Keep Alive Mode
: The wireless 3G Broadband Router will
periodically check your Internet connection and automatically re-
establish your connection when disconnected. (Default: 60 seconds)
■
Manual Mode
: The unit will remain connected to the Internet
without disconnecting.
Summary of Contents for Barricade SMCWBR14S-3GN
Page 1: ...BarricadeTM N Draft 11n Wireless 3G Broadband Router SMCWBR14S 3GN USER GUIDE ...
Page 10: ...ABOUT THIS GUIDE 10 DECEMBER 2009 REVISION This is the first revision of this guide ...
Page 14: ...CONTENTS 14 C LICENSE INFORMATION 115 The GNU General Public License 115 ...
Page 126: ...SMCWBR14S 3GN ...