C
HAPTER
4
| Initial Configuration
Setup Wizard
– 36 –
◆
Enable MAC Clone
— Some ISPs limit Internet connections to a
specified MAC address. This setting allows you to manually change the
MAC address of the wireless 3G Broadband Router's WAN interface to
match the PC's MAC address provided to your ISP for registration. You
can enter the registered MAC address manually by typing it in the
boxes provided. Otherwise, connect only the PC with the registered
MAC address to the wireless 3G Broadband Router, then click the “Clone
Your PC’s MAC Address.” (Default: Disabled)
S
TEP
3 - WAN
S
ETTINGS
- PPTP
Enables the Point-to-Point Tunneling Protocol (PPTP) for implementing
virtual private networks. The service is provided in many European
countries.
Figure 16: Wizard Step 3 - WAN Settings - PPTP
The following items are displayed on this page:
◆
Ethernet Port
— Select “PPTP” for the WAN port connection from the
drop-down list.
◆
USB Port
— Enables support for a WAN connection using a USB 3G
modem. For more information, see
“Step 3 - WAN Settings - 3G” on
page 39
. (Default: Disabled)
◆
Server IP
— Sets the PPTP server IP Address. (Default: pptp_server)
◆
User Name
— Sets the PPTP user name for the WAN port.
(Default: pptp_user; Range: 1~32 characters)
Summary of Contents for Barricade SMCWBR14S-3GN
Page 1: ...BarricadeTM N Draft 11n Wireless 3G Broadband Router SMCWBR14S 3GN USER GUIDE ...
Page 10: ...ABOUT THIS GUIDE 10 DECEMBER 2009 REVISION This is the first revision of this guide ...
Page 14: ...CONTENTS 14 C LICENSE INFORMATION 115 The GNU General Public License 115 ...
Page 126: ...SMCWBR14S 3GN ...