![background image](http://html1.mh-extra.com/html/smc-networks/barricade-smc7004vbr/barricade-smc7004vbr_user-manual_1300269040.webp)
A
DVANCED
S
ETUP
4-12
WAN
Specify the WAN connection type provided by your Internet Service
Provider, then click “More Configuration” to enter detailed configuration
parameters for the selected connection type.
Dynamic IP
The Host Name is optional, but may be required by some ISPs. The
default MAC address is set to the WAN’s physical interface on the
Barricade. Use this address when registering for Internet service, and do
not change it unless required by your ISP. If your ISP used the MAC
address of an Ethernet card as an identifier when first setting up your
broadband account, connect only the PC with the registered MAC address
to the Barricade and click the “Clone MAC Address” button. This will
replace the current Barricade MAC address with the already registered
Ethernet card MAC address.
If you are unsure of which PC was originally set up by the broadband
technician, call your ISP and request they register a new MAC address for
your account. Register using the default Barricade MAC address.
Summary of Contents for Barricade SMC7004VBR
