manualshive.com logo in svg

SMC Networks 7404WBRA, User Manual

Share
Download
SMC Networks 7404WBRA User Manual Download Page 65

R

OUTING

 S

YSTEM

4-37

Routing Table

Parameter Description

Flags

Indicates the route status: 
C = Direct connection on the same subnet.
S = Static route.
R = RIP (Routing Information Protocol) assigned route.
I = ICMP (Internet Control Message Protocol) Redirect route.

Network 

Address

Destination IP address.

Netmask

The subnetwork associated with the destination.
This is a template that identifies the address bits in the destination 

address used for routing to specific subnets. Each bit that corresponds 

to a “1” is part of the network/subnet number; each bit that 

corresponds to “0” is part of the host number.

Gateway

The IP address of the router at the next hop to which matching frames 

are forwarded.

Interface

The local interface through which the next hop of this route is reached. 

Metric

When a router receives a routing update that contains a new or 

changed destination network entry, the router adds 1 to the metric 

value indicated in the update and enters the network in the routing 

table.

Summary of Contents for 7404WBRA









































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands