SmartRG™ Residential Gateways
P a g e
| 60
C o n f i d e n t i a l
S m a r t R G © 2 0 1 2
Configure Access Controls (HTTP, Telnet, SSH, etc.)
To enable/disable gateway management services such as HTTP, Telnet and SSH:
1.
Select
Management -> Access Control -> Services.
Figure 47 Enabling/Disabling HTTP, Telnet, SSH... Access
2.
Enable/disable LAN and/or WAN access to the various management services as desired .
3.
Click Save/Apply.
NOTE
For security reasons it is strongly recommended that WAN access to all services be
disabled accept during deployment or when troubleshooting.