SmartRG™ Residential Gateways
P a g e
| 48
C o n f i d e n t i a l
S m a r t R G © 2 0 1 2
To configure the SmartRG’s QoS feature:
1.
Ensure the layer 2 WAN interface “Enable Quality of Service” check box is checked as
detailed in the Layer 2 Interface configuration sections.
2.
Select
Advanced Setup -> Quality of Service -> QoS Config
Figure 39 Enable SmartRG QoS Processing
3.
Check “Enable QoS”, set the “Default DSCP Mark” to “No Change(-1)” and click Apply/Save.
4.
Create the VoIP queue by selecting
Advanced Setup -> Quality of Service -> QoS Queue
Config
and click Add.
Figure 40 QoS VoIP Queue Configuration