SmartRG™ Residential Gateways
P a g e
| 22
C o n f i d e n t i a l
S m a r t R G © 2 0 1 2
7.
IMPORTANT
- Check “Enable Quality of Service” if you intend to support QoS classified
traffic through the WAN service.
8.
Click Apply/Save.
NOTE
Enabling QoS for routed IPTV service configurations will improve channel change
performance.
Configuring the Layer 2 Interface (PTM – Supported on ADSL and VDSL)
To configure a PTM layer 2 interface :
1.
Select
Advanced Setup -> Layer2 Interface -> PTM Interface
and click Add.
Figure 14 VDSL Layer 2 Interface Configuration
2.
Select the “DSL Latency” – Path0 is typical.
3.
Select the “PTM Priority” – Normal Priority is typical.
4.
Select the “Connection Mode” – Default Mode is typical (when VLAN segmentation is not
required).