Smartgen HEM4300, User Manual

Page: 35 / 55

HEM4300 Engine Controller User Manual Page 35 of 55
No. Item Range Default Description
8 Maintenance 7 Set (0-1) 0 alarm can be removed by resetting
maintenance time. Details see Table
15.
9 Maintenance 8 Set (0-1) 0
10 Maintenance 9 Set (0-1) 0
11 Maintenance 10 Set (0-1) 0
12 Maintenance 11 Set (0-1) 0
13 Maintenance 12 Set (0-1) 0
14 Maintenance 13 Set (0-1) 0
15 Maintenance 14 Set (0-1) 0
16 Maintenance 15 Set (0-1) 0
ECU Information Display Setting
1
ECU Information Display (0-1) 1 0: Disable (Display “###” when ECU not
send data);
1: Enable (Not display
2 D+ Voltage (0-1) 1
3 Oil Temperature (0-1) 1
0: Shield;
1: Display (When smart delay is active,
it will not display as not receiving
data).
4 Fuel Temperature (0-1) 1
5 Fuel Pressure (0-1) 1
6 Inlet Temperature (0-1) 1
7 Outlet Temperature (0-1) 1
8 Turbo Pressure (0-1) 1
9 Coolant Pressure (0-1) 1
10 Coolant Level (0-1) 1
11 Fuel Consumption (0-1) 1
12 Accum. Fuel Consumption (0-1) 1
13 Load Rate (0-1) 1
14 Torque Percentage (0-1) 1
15 Water in Fuel (0-1) 1
16 Urea Level (0-1) 1
17 DPF Smoke Load Rate (0-1) 1
18 SCR Inlet Temperature (0-1) 1
19 SCR Outlet Temperature (0-1) 1
20 ECU Accum. Run Time (0-1) 1
NOTES
:
— After using USB, cover USB protective cap for better dustproof and waterproof effect;
— Regarding parameter setting on PC software, it does not need to input default factory password “01234” if not
change; if it is the first time to do configuration on PC, then it is needed to input module password in password
screen;
—
After entering correct password, it can enter parameter setting without repeatedly entering it within 5min;
— Aux. input ports cannot be set the same items. Otherwise function shall not work correctly; Output ports can be set
the same item;
—
Engine temperature sensor correlation settings: If it is conventional engine and engine temperature is needed,
engine temperature correlation sensor needs to be set. Engine temperature will display after choosing
corresponding aux. sensor channels that connects temperature sensor;
— Engine oil pressure correlation settings: If it is conventional engine and it is needed to use engine oil pressure to
judge crank disconnect, engine oil pressure correlation sensor needs to be set. Engine oil pressure will display and