Smartgen ALC700 SERIES, User Manual

Page: 43 / 51

ALC700 Series Light Tower Set Controller
ALC700 Series Light Tower Set Controller 2018-03-02 Version 1.4 Page 43 of 51
8.9 LIGHT INPUTS SETTINGS
Work mode can be set as
：
Feedback input, Control input, Invalid. The control logic is as
following:
System Mode
Light Inputs
Setting
TFT Light
Status
Light Relay
Output Status
Panel Light
Switch
Manuel Mode
Feedback Input
Light Input
Status
Light Input
Status
Valid
Control Input
Light Input
Status
Light Input
Status
Invalid
Invalid
Relay Output
Status
Panel Switch Valid
Auto Mode
Feedback Input
Light Input
Status
System Control Invalid
Control Input
Relay Output
Status
System Control Invalid
Invalid
Relay Output
Status
System Control Invalid
Stop Mode
Feedback Input
Light Input
Status
Invalid Invalid
Control Input Invalid Invalid Invalid
Invalid Invalid Invalid Invalid
8.10 BATTERY LOW VOLT WORK MODE
This feature is designed to protect the low battery voltage and ensure that the battery has
enough power to start the unit. When the battery voltage has fallen below the set value, the
unit cranks for a while and charge the battery; after running for a while, the unit will stop
automatically. The work mode can be set as Invalid, Auto Mode Active, Manual Mode Active,
Auto And Manual Mode Active.
8.11 TIMER MODE SELECT
Timer start mode can be set as daily, weekly, monthly and custom week. Users can set the
start time, run duration, scheduled start or scheduled not start function. If the run duration is
set as 00:00, then the unit will not be start.