ALC700 Series Light Tower Set Controller
ALC700 Series Light Tower Set Controller 2018-03-02 Version 1.4 Page 13 of 51
5.3 SCHEDULED START/STOP
A.
Press
，
its indicator light on, and controller enters
Auto
mode. Meanwhile, the panel
display Auto Mode Select (Fig 1); Press
and
to select 01 Auto Timer Mode and
press
or
to confirm (Fig 2); Press
and
to select 01 Timer Start and
press
or
to confirm (Fig 3).
B.
When there are 10s left from start time, audible alarm relay is active (if configured). When
start time is up and start remaining time is more than 0s, light tower set begin cranking and
flashlight is twinkling (if configured). Stop delay time will be displayed on the first line (Fig
4).
C.
If generator voltage and frequency has reached on-load requirements (
Voltage≥on-load
voltage and frequency≥on-load frequency), all the lights will illuminate in proper order and
the illumination interval delay is 2s (can be set as 1~300s). (Fig 5,6)
Fig 1
AUTO TIMER MODE
START TIME 16:28:00
CURRENT TIME 12:05:18
GENERATOR AT REST
Fig 4
STOP DELAY 10:10:59
START TIME 16:28:00
CURRENT TIME 16:28:00
CRANKING 5s
Fig 5
STOP DELAY 10:07:42
START TIME 16:28:00
CURRENT TIME 16:32:18
2# LIGHT ON 09s
AUTO MODE SELECT
01 AUTO TIMER MODE
02 AUTO SMS MODE
03 SUNRISE/SUNSET MODE
AUTO TIMER MODE
01 TIMER START
02 TIMER STOP
03 TIMER SET
Fig 2
Fig 3
