23
©SMARTfit Inc. All Rights Reserved.
12.
The slider located on the back
of the rack will fit through the
front slot of the pole extension.
13.
The rack will move easily down
the post if both screws are
loose enough.
14.
Use the T Handle Hex Wrench,
to tighten the two middle
screws to lock the rack in place.
15.
Re-attach the front cover cap.
16.
Loosen/Tighten the knob on the
back of the pole extension to
adjust the height.
17.
The back of each strike pod has
3 insertion points. The rack has
three screws that will be used
to secure the Strike Pod.
