21
©SMARTfit Inc. All Rights Reserved.
Pod Stand Assembly
1.
The following items are needed
to assemble the Stand: 1 base, 1
pole extension, 2 SMARTfit
weights, 1 T-handle Hex Wrench
and 1 rack.
2.
Loosen the knob attached to the
pole extension. Adjust the post,
so that there is a 6 to 12-inch
difference between the front and
back post.
3.
Stack and align two SMARTfit
weights on top of each other.
4.
Place the bottom of the post
through one end of the weights.
5.
Tilt the weights and post to one
end so that you can feed 3 to 5
inches of the post through the
bottom end of the weights.
