CAMERA ADJUSTMENT
CAMERA ADJUST
The picture quality of each camera can be adjusted by using the CAMERA ADJUST setup menu.
This setup menu is composed of 7 options.
CAMERA
CA1
CONTRAST
25
BRIGHTNESS
25
COLOR
25
TINT *
25
SHARPNESS
01
SEQUENCE
03 SEC
*) Tint is only activated in NTSC system.
SEQUENCE
This option is used to set the dwell time of the selected camera when the monitor is operated in
the SEQUENCE mode. The picture sequences in the order of CA1, CA2, CA1, CA2.. by pressing
the SEQUENCE button on the remote control.
Use the following steps to set the picture quality of each camera and other options.
STEP
ACTION
1
2
3
Press MENU and then move the horizontal bar to CAMERA ADJUST using
or .
Press
or
to display sub-menu of CAMERA ADJUST.
Locate the horizontal bar at CAMERA and then select the camera to be
adjusted using
or
.
4
Select the option to be adjusted using or .
5
Adjust the option selected using
or
.
- Only the picture quality of the selected camera is adjusted.
6
Press MENU to go to the previous menu or exit from the OSD menu.
17
