CHAPTER 2
GETTING STARTED WITH THE DISPLAY
10
TIP
Connect a USB mouse and keyboard to the USB plug on the connection panel to make the
following procedure go more quickly.
To set up the display
1. Press the
Power
button on the remote control.
The display turns on and the set-up wizard appears.
2. Select your preferred language from the list, select
Next
and then press
OK
on the remote
control.
3. Select your country from the list, select
Next
and then press
OK
on the remote control.
4. Enter a name for the SMART Board, select
Next
and then press
OK
on the remote control.
5. Select your time zone from the list, select
Next
and then press
OK
on the remote control.
6. Set the date, select
Next
and then press
OK
on the remote control.
7. Set the time, select
Next
, and them press
OK
on the remote control.
8. If the display isn’t using a wired network connection, select
Configure Wi-Fi
and then press
OK
on the remote control.
The wireless connection wizard opens.
9. Select a wireless network from the list ,and then press
OK
on the remote control.
10. Enter the password for the wireless network, select
Connect
and then press
OK
on the
remote control.
The wireless connection wizard closes and you return to the
Configure Wi-Fi
step of the set-up
wizard.
11. Select
Next
and then press
OK
on the remote control.
12. Select
Finish
and then press
OK
on the remote control.
The welcome screen appears.
Connecting to a network
Before you connect the display to a network, your organization’s network administrators need to
configure the network for the display.
Summary of Contents for SMART Board 2000 series
Page 16: ......
Page 54: ......
Page 59: ......
Page 60: ...SMART TECHNOLOGIES smarttech com support smarttech com contactsupport smarttech com kb 171178 ...