Smart Technologies Board 8084i-G4, Administrator'S Manual

Page: 87 / 96

Appendix C
81 smarttech.com/kb/170819
Appendix C: Resetting the room system to
factory defaults
This appendix explains how to reset the room system to factory defaults.
In most situations, you should reset the room system from the
Settings
screen. However, if the
room system is in an unrecoverable state or the
Settings
screen is otherwise not accessible, you
can reset the room system from the BIOS.
To reset the room system from the Settings screen
1. On the console, press
Options
, and then press
Settings
.
The
Enter your credentials
screen appears.
2. Type the room system administrator account’s user name and password in the text boxes, and
then press
Authenticate
.
The room system restarts.
3. Type the room system administrator account’s password, and then press ENTER.
The Skype for Business Admin Console appears.
4. Press
Web Updates
.
5. Press
Reset the Device to Factory Image
.
The room system restarts, and the software is reset to factory defaults.
6. Complete the procedure in the
SMART Room System with Skype for Business setup guide
(see
Setup guide
on page 9).
To reset the room system from the BIOS
1. Turn off the room system (see
Turning off the room system
on page 13).
2. Connect a USB keyboard to the room system appliance.