CHAPTER 5
REMOTELY MANAGING THE ROOM SYSTEM
38
smarttech.com/kb/170819
Control
Procedure
Notes (if any)
Legacy Redirection
Mode
Select
Enabled
to leave the port open at all
times when redirection is enabled in Intel MEBx.
User Consent
User Opt-in
Select
KVM
to require local user consent for
Intel KVM remote control.
OR
Select
None
to not require local user consent.
This control doesn’t affect your room
system.
If you enable user opt-in for Intel KVM,
users are prompted with a key code. The
users must provide this key code to the
administrator who is attempting to
remotely connect to the room system.
Opt-in Configurable
from Remote IT
Select
Enabled
to allow remote users to change
the user opt-in policy.
Password Policy
Select
Default Password Only
to allow
changing the Intel AMT password from the
network interface if the default password hasn’t
been changed yet.
OR
Select
During Setup and Configuration
to
allow changing the Intel AMT password from
the network interface during only setup and
configuration.
OR
Select
Anytime
to allow changing the Intel AMT
password from the network interface at any
time.
Network Setup
Intel® ME Network Name Settings
Host Name
Type the host name for Intel AMT.
If you configure a set host name, ensure it
mirrors the Windows operating system’s
host name to ensure stability.
Domain Name
Type the domain name for Intel AMT.
Shared/Dedicated
FQDN
Select
Shared
to use an FQDN that is shared
with the host.
OR
Select
Dedicated
to use a dedicated FQDN for
Intel MEBx.
Dynamic DNS
Update
Select
Enabled
to enable the firmware to
actively register its IP address and FQDN on the
domain name system (DNS) using the Dynamic
DNS (DDNS) Update protocol.
OR
Select
Disabled
to disable this feature.
Period Update
Interval
Type the interval (in minutes) at which the
firmware DDNS Update client sends period
updates.
This control is only available if you enable
Dynamic DNS Update.
