SDS-2500 USER MANUAL V1.0
© 2018 Smart-e (UK) Ltd
www.smart-e.co.uk
PAGE | 28
10
TCP/IP CONTROL
Section 5.2 of this manual details the port and wiring specifications required for the RJ45 TCP/IP control port
located on the rear of the SDS-2500.
The SDS-2500 has a RJ45 connector on the rear of the unit to accept control via TCP/IP communications.
To set up TCP/IP communications you will need to connect the SDS-2500 to your network or PC, using the
appropriate cabling. Then refer to section 9 of this manual as you will need to initiate the TCP/IP port via the
HDMI-944F application, for which a separate user guide is provided.
CAT5e/6 cable up to 90m in length
(T568B termination at both ends)
NETWORK SWITCH
CAT5e/6 cable up to 90m in length
(T568A
– B Termination)
Summary of Contents for Sds-2500
Page 1: ......
